News News
Parameter introduction of salt spray tester
author：管理員 Publication time：2016-12-06 10:33:54 Read：
9
second
| Product Name: precision salt spray tester Model: lx-60 Specification: 1、 Model test space: 600 * 450 * 400mm (w * D * h) mm Two. Outer box size: 1075*630*1185mm (W*D*H) mm 3、 Power supply: 220V single phase 2kW 50Hz 4、 Material: (A) The laboratory adopts imported PVC polyethylene board with thickness of 5mm and durable temperature of 85 ℃. (B) The laboratory is sealed with imported European acrylic plate with a thickness of 5mm. (C) The medicine test supplement bottle adopts the concealed water level meter, which is easy to clean and not easy to crack. (D) The best heat preservation effect is that the pressure air barrel adopts sus × 304 stainless steel high pressure resistant barrel. (E) The plane dividing frame is adopted for the backboard in the laboratory, and the angle can be adjusted at will. The four sides of the backboard are completely consistent in terms of falling fog and receiving fog. The number of test pieces is large 5、 According to the specification of cns.jis.astm, the constant temperature control can be set (A) brine spray test: NSS, ACSS (1) Laboratory: 35 ℃± 1 ℃ (2) Pressure air barrel: 47 ℃± 1 ℃ (B) Corrosion resistance test: CASS (1) Laboratory: 50 ℃ ± 1 ℃ (2) Pressure air barrel: 63 ℃± 1 ℃ 6、 Air supply system: the air pressure is 1kg / cm2, which is adjusted in two sections The first adjustment is 2kg / cm2 imported air filter with drainage function; the second adjustment is 1kg / cm2 pressure. Seven. Spray mode: (A) Adopting bernoult principle to absorb salt water and then atomize, the atomization degree is even and there is no blocking crystallization phenomenon, which can ensure the standard of continuous test. (B) Nozzle: made of special glass nozzle, it can adjust the size of spray volume and spray angle. (C) spray volume mode 1-2mI (mI/80cm /h) (16 hours average). (D) spray mode: continuous. 8、 Heating system: Adopt direct heating mode, fast heating speed and reduce standby time. When the temperature reaches on.off switch, the temperature is accurate and the power consumption is small (the heating tube is made of high corrosion-resistant titanium tube). 9、 Control system: (a) the temperature controller in the laboratory is 0-99.9 ℃, the LCD type double digital display free has p.i.d automatic calculation, and the control error is ± 1 ℃ (DHC) …………………………………………………………………… 1 only (b) the temperature of the pressure air barrel is controlled at 0-99.9 ℃, and the LCD type double digital non display has p.i.d automatic calculation with control error of ± 1 ℃ (DHC) ………………………………………………………………… 1 only (C) Safety temperature control of liquid expansion of heating tank in laboratory: 30-110 ℃ (Zhihe, Taiwan) 1 only (D) Safety temperature control of liquid expansion of pressure air drum 30-110 ℃ (Zhihe, Taiwan) 1 only (E) Digital display time control 0.1s-9990hr 1 only (F) Timer 0-99999 HR (hours) 1 only (G) Relay 3 only (H) Solid state relay (Taiwan Yangming ssr-25da) 2 only (I) spray solenoid valve (AIRTAC)... 1 only (J) Water filling solenoid valve (Changtong) 1 only (K) Demisting solenoid valve (Changtong) 1 only (50) Plate lighting type buckle switch, can buckle 20000 times continuously (M) Water adding system: it adopts automatic and manual water adding supplement system, which can supplement automatically or manually when the water level is too low 10、 Safety protection device: (A) When the water level is low, the power supply will be cut off automatically. (B) In case of over temperature, the power supply of heater will be cut off automatically. (C) Safety warning light device is attached. |