News News
Test environment setting of wire tester
author：管理員 Publication time：2016-12-16 10:39:56 Read：
24
second
| At present, the main wire tester in the market is the two-wire wire tester, and our four wire tester is much more advanced than the two-wire tester. It is used in short circuit determination, AB terminal resolution, test speed, test accuracy, AC The DC range is much stronger than the two-wire type, but some products with two-wire tester are sufficient, but some products with very strict requirements cannot meet the requirements with two-wire tester, so it is necessary to use four wire tester. (a) Press [sys] to select to this function (b) Press [Enter] (c) LCD display screen is as follows (d) Please select the required item with [↑] or [↓], and press S1 [Select] to switch (e) Press [exit] to jump out 〔1〕 Test file type ■ general documents are designated as single file tests ■ sequential files are designated as sequential file tests ■ the automatic discrimination test system automatically distinguishes file test 〔2〕 Test results show that ■ display all test data regardless of error or not ■ steps for displaying bad display errors 〔3〕 Test result statistics ■ open statistics mode ■ off statistics mode off 〔4〕 Test result printing ■ open print test data mode ■ off print test data mode off 〔5〕 Control signal output mode ■ the signal output from the continuous signal remote is a long signal ■ the output signal of the pulse signal remote is a short signal 〔6〕 Defective product locking ■ when the test result of the object to be tested is bad, the test stops and all keys are locked ■ if the test result of the object to be tested is poor, the test can be continued 〔7〕 Test alarm sound ■ all sound is set as sound no matter whether the test result of the object to be tested is good or bad ■ no matter the test result of the tested object is good or bad, it is set as silent sound ■ good product has sound only when the test result of the object to be tested is good product ■ if there is sound, only if the test result of the object to be tested is bad, there will be sound 〔8〕 Continuous alarm sound of defective products ■ when the test result of the object to be tested is defective, a continuous alarm sound will be given ■ no continuous alarm sound when the test result of the object to be tested is defective 〔9〕 Test count display ■ display all ■ display total |