The taper swing tester is a national standard test instrument for testing the bending strength of plug leads and wires at different angles, which conforms to UL817 and other relevant standards. The device is novel in appearance and tests 6 groups of test products respectively, recording test results accurately and displaying R / min digitally.

Parameter introduction:

1. Power supply: AC 220V / 50Hz

2. Power: 1000W

3. Weight: 50, 100, 200, 300, 500g (± 5g)

4. Test station: 6 station test

5. Angle setting: 10-720 degrees left and right can be set

6. Allowable error: ≤ 2 °

7. Times setting: 1 ～ 9999 (max)

8. Speed: 10-50 times / min (max)

Note: this speed is directly related to the swing angle: the allowable error is ≤ 3 times / min; the reason for the error is that the driving system needs to consume a little time for positive and reverse rotation, which is inevitable.

9. Control mode: Panasonic motor + PLC + touch screen

10. Volume: about L1400 * W600 * h950mm

11. Weight: About 100kg