Installation sequence of high pressure wire tester for Lianxin testing
author:管理員 Publication time:2018-02-03 17:10:51 Read:
22
second
DC high-voltage wire tester is a wire tester used to test various high-voltage wires / Cables for open circuit, short circuit, conduction impedance, etc. How to use and install DC high-voltage wire tester? What are the steps and precautions for installing DC high-voltage wire tester?
1. Please confirm the power supply of the power supply and connect the AC 220V power supply
2. Connect the adapter and the cable to be tested as required
3. Turn on the power and the system will execute the self-test procedure
4. After the test procedure is completed, it is formally entered into lx-898 system.
5. To finish, press [power switch] to finish
6. Self test will be performed after power on, about 5-10 seconds
7. In {ready} state, operation of auxiliary keys S1 ~ S6 has the following adjustment functions
8. S1 turn on the backlight of LCD
9.s2 dim the backlight of LCD
The above content is provided by Shenzhen Lianxin testing equipment Co., Ltd. please pay attention to the content update of this station or contact with the R & D and production department of our company for more technical knowledge about the installation, maintenance and repair of wire tester.
|