current location：Home > Product > Four-wire Wire Tester
LX-360A Wire Tester
Product description
The product description
Product name: lx-360a wire tester product model: lx-360a
PRODUCT features FEATUERS
■ system provides Chinese/English free switching interface
Boot self - diagnosis, self - correction
■ system with automatic scanning and automatic point finding function
■ the system provides advanced instantaneous short circuit and conducting tests
■ it can be used for single side, standard, multi-section and point function testing of wire
■ highest AC1000V,DC1500V test voltage
S system adopts advanced four line measurement, minimum detectable to 1 m Ω
■ provide LCR meter module for precision measurement analysis
Poor judgment is more accurate, the speed of testing than the traditional similar products increased twice
■ 320*240 full Chinese/English large screen graphics LCD display
Linear conduction and safety and component testing
■ fully programmable continuous testing
■ provide a variety of interfaces for different applications
■ the system provides statistics and printing functions, as well as statistical analysis of good and bad products
Technical specification SPECIFI CATION
Product model number of measurement point number of measurement voltage
360A 64Pin DC:5~1000VDC, AC:100~700VAC
Bullet test scope
Broken/short circuit O/S 1 k Ω Ω ~ 50 k
Instant conduction resistance test INT. COND 1 m Ω ~ 10 Ω
Conduction resistance test COND 1 m Ω ~ 50 Ω
Resistance measurement R Ω 0.02 ~ 10 m Ω
Capacitance measurement C 10pF~1000 F
Diode measurements D 0.0V~7.5V
Insulation impedance Ω i. 0.1 M ~ 1500 M Ω
Dc leakage current IL 0.1 A~1000 A
High voltage leakage current IL 0.1ma ~5mA
Advanced functionality can be programmed for continuous testing
Automatically find some
Self diagnosis
Self-correcting to zero
Basic accuracy ±1%
Test scan mode auto/manual scan can be switched
Measurement speed 0.1Sec basic value
Measuring frequency and signal/voltage 100~100 KHZ, 1VAC
Low voltage measurement signal 5VDC,50mA Aax
Accuracy: ±0.5%
High voltage (leakage current) test 100~700VAC (360B)
100~1000VAC (360 models)
0.01~60Sec Delay time setting
High-voltage insulation test 5V~1000VAC (360A/360B)
5V~1500VCD (360 models)
Accuracy: ±10%
Display/alarm device 320*240 resolution graphic LCD display
Six digit digit display
Pass/Fail LED red and green light/screen display/alarm
Measuring contact 64/128 measuring contact
Optional 256/512 contacts
High voltage correction of positive and negative output
Find some terminals automatically
Control panel system/fast/edit/function/key group
Interface printer port
Remote control port
Rs-232 communication port
Memory device is built with 512KB SRAM, which can be expanded to 1024KB
Built-in backup battery
Power supply 115/230vac voltage input ±10%
60/50 hz
Accessories automatically find a point probe
Remote control line (optional)
RS:232 signal (optional)
Two in one 64Pin horn adapter
The power cord
Operating manual (warranty card)
Temperature of 15 ℃ ~ 35 ℃
Relative humidity RH≤75%
Size :(W*D*H) 455*190*350mm
Weight about 13KG (excluding accessories)
The wire specification requires a maximum of 1 F
