Rainfall test box
Product description
The ipx1-2 vertical raindrop test is mainly used to test the product's performance in storage, transportation and use in rainy weather. IPX1 / IPX2 waterproof testing equipment is mainly used in electronic electrical products, lamps and lanterns, electrical cabinets, electrical components, such as automobiles, motorcycles and their parts and products under the condition of the climate simulation in the rain, and other related physical properties of product testing, testing, after verification to judge the performance of the products is up to par, so that the design of the product, improve, verification and inspection.
Conform to IEC60529:2001 "Degrees of protection provided by enclosures(IP Code)", gb4208-2008 "enclosure protection class (IP Code)" 14.2.1, 14.2.2 and FIG.3, and GB7000.1 "luminaires part I: general requirements and tests" 9.2.3.
1. Water tank frame: industrial alloy aluminum (surface oxidation)
2. The equipment frame and sample turntable are all made of high quality aluminum alloy and SUS304# stainless steel plate to ensure long-term use without rust.
3. Drip board: vacuum design, made of high rustproof stainless steel, durable.
4. Upper and lower sealing plate of the water tank: 3mm SUS304 stainless steel (the lower sealing plate has a threaded hole to install the needle seat)
5. Water tank lifting and lifting drive: screw (SUS304 stainless steel T32X6), nut device to drive the lifting and lifting, with anti-falling safety functions, when there is an object under the water tank against the water tank, the nut will automatically from the water tank, to prevent damage to the water tank and other objects function.
6. Lifting guide rail of water tank: shaped guide rail, rubber pulley guide wheel
7. Dripping aperture: ￠0.4mm
8. Hole spacing: 20mm
9. Rainfall: 1+ 0.mm /min, 3+0mm/min, user set parameters (error: +0.5mm/min)
10. Dripping height: 200mm (equipment self-control and manual control)
11. Test time: 0-999min (configurable and centrally controlled)
12. After the test, the water in the water tank is automatically drained and can be blow-dried with compressed air (to prevent the water from scaling and blocking the needle).
13. Body material: industrial alloy aluminum profiles
14. Imported panasonic motor drive, accurate Angle, accurate time, high quality life
15. The rotary table; Can tilt 15o;
16. Optional anti-clogging device (including filter, air pump and compressor)
17. Hanging wall structure, drip pan running smoothly.
18. Drip flow rate: the flow meter has its own regulating valve, which can be accurately adjusted manually.
19. The rainfall device can rise and fall automatically, and the nozzle will stop automatically when it is located at the highest point of the tested object at 200mm (detected by photoelectric switch).
20. Nozzle contact position brass cone design, no tool is needed to replace the needle; Stainless steel mesh shield is installed under the needle to prevent the test operator from accidentally touching the head of the test needle.
21. Filtration measures: the equipment is equipped with a high-precision filter, which can effectively filter impurities in tap water; Filter element can be replaced regularly.
|
The serial number |
specifications |
parameter |
|
1 |
5/5000 |
600mm x 600mm（4/5000 |
|
2 |
External size of equipment |
L800×D800×H2300 mm |
|
3 |
Turntable diameter |
￠400 mm |
|
4 |
Drop of aperture |
￠0.4mm。 |
|
5 |
The distance between the hole |
20 x 20 mm |
|
6 |
rainfall |
1-5mm/Min(±0.5mm/min) |
|
7 |
|
Manually adjust |
|
8 |
Height of drip tank |
800-1500adjustable |
|
9 |
Turntable bearing |
50KG |
|
10 |
Turntable speed |
1 r/min |
|
11 |
Tilting degree of turntable |
0° or 15° |
|
12 |
Lifting range of turntable |
stationary |
|
13 |
The test of time |
0-999 min |
|
14 |
Protection device |
Electricity leakage, water shortage, short circuit |
1. The equipment frame and sample turntable are all made of high quality aluminum alloy model and SUS304# stainless steel plate, so as to ensure long-term use without rust.
2, the electric part of the turntable is fully sealed to prevent water leakage.
3. The drip water tank adopts vacuum design and high rustproof stainless steel structure.
4. Nozzle contact position brass cone design, convenient for timely installation and replacement of the nozzle.
5. The rainfall device can rise and fall automatically. The nozzle is located at 200mm at the highest point of the object under test.
6. With the function of compressed air air drying, after the completion of the test, the excess water in the drip box can be removed clean, to avoid long-term accumulation of water and scale blocking the needle.
7, imported electric lifting motor drive, stainless steel screw, pulley guide supplemented by lock nut lifting device.